Product Range
 
Home >> Products
 

PVC ARMOURED & UNARMOURED POWER CONTROL CABLES WITH COPPER
CONDUCTOR

 

CONDUCTOR:

The construction of conductor is as follows:

Copper Sq. mm.

Solid /Stranded

Flexibility Class

1 to 1.5

Solid

Class 1 as per IS:8130/1984

2.5 to 6

Solid / Stranded

Class 1 /Class 2 as per IS:8130/1984

10 and above

Stranded

Class 2 as per IS:8130/1984

 

INSULATION :

Insulation is of PVC compound as per the requirement of IS:5831 (1984)

Type

Application

PVC Compound

Max. Conductor Temperature

A

Insulation

General Purpose PVC (GPPVC)

700 C

C

Insulation

Heat Resistance PVC (HRPVC)

850 C
 

INNER SHEATH :

Cables having two or more cores are provided with a common inner sheath applied either by PVC extrusion or by with PVC tape.
 
ARMOURING :
Where the calculated diameter of inner sheath does not exceed 13.00 mm, the armour is of round galvanised steel wires and for calculated diameter of inner sheath above 13.00 mm, flat galvanised steel wire are used.
 
OUTER SHEATH :

The outer sheath is of PVC conforming to the requirement of ST1 compound of IS: 5831 (1984). The colour of outer sheath is generally black or grey.
 

CORE IDENTIFICATION:

For Power cables and Control cables upto 4 cores, the cores are identified by different colours as per IS : 1554:

                                    Single core    :Red, Black, Yellow or Blue
                                    2 core             :Red and Black
                                    3 core             :Red, Yellow and Blue
                                    4 core             :Red, Yellow, Blue and Black
                                    5 core             :Red, Yellow, Blue, Black and Grey.

Where the number of cores exceeds 5, two adjacent cores are blue for reference and yellow for direction in each layer. The remaining cores in each layer are grey. On specific request we can also provide core numbering.

 
The data and information given herein are purely as a guide. VIRAL takes no responsibility for any damages arising out of incorrect use.
 
Factory & Regd. Office : D-7, MIDC Ambad, Nashik - 422 010 , Mah. , India. Telephone : +91 253 2382340 / 2382430.FAX : +91 253 2382430.